Derwent Valley Mills
Derwent Valley Mills comprises a well-preserved historic landscape of industrial buildings and worker's houses.
The story of the Derwent Valley Mills starts in 1771 when Richard Arkwright began to build a water-powered mill for spinning cotton at Cromford. Developing his water frame, which could be operated by young people with very little training, factory production became possible. The workers lived in an especially built village.
The site includes Mason Mill, the Cromford Mill Complex, the settlement at Cromford with houses and public facilities, the Cromford Canal, Belper North Mill, Long Mill of Darley Abbey, and several housing complexes.
Map of Derwent Valley MillsLoad map
This is an easily accessible site by public transport, with trains running hourly from Derby up to Matlock. For my visit, I disembarked at Whatstandwell and crossed the footbridge which leads immediately onto the Cromford Canal, built between 1789 and 1794 to transport goods manufactured by the mills. The canal is narrow here and covered in a thick mat of algae but has a well-maintained footpath that I followed all the way to the end of the canal at the village of Cromford, a pleasant walk of around three miles mostly through woodland. En route there are various small original bridges passing over the canal as well as aqueducts that take the canal over the railway and the River Derwent. The Leawood Pump House (dating to 1849) was built to transfer water from the river to the canal and is currently closed for repairs but there are apparently demonstrations of the restored steam-powered pump when it is open. Further along the canal, High Peak Junction was where goods were transferred from the canal to the railway (opened 1830) that travelled through the Peak District to Buxton then on to Manchester and was the steepest adhesion railway in the country. This railway was closed by the Beeching cuts of the 1960s and its route is now a hiking trail but the start of the line here has preserved station buildings, section of track, signals, and a railway car with an audio tour available to explain the history. The rest of the canal parallels the surviving railway line to Matlock until it reaches its end at Cromford, where there are further original buildings of the wharf used for loading up the products of the mills and, in modern times, the opportunity to take a ride on a narrowboat down the canal back to High Peak Junction.
Cromford feels like the core of this site and has its own railway station so could be visited in isolation. St Mary’s Church was built in the late 18th Century by the river and is where many of the Arkwright family who owned the mills are buried. From the bridge next to the church, the Arkwright family home of Willersley Castle can be seen. This was a hotel in recent years but closed down due to the pandemic in 2020 and was currently up for sale. Across the river are the Cromford Mills, where Richard Arkwright built the first water-powered cotton mill in 1771 and so began a revolution in textile manufacturing that would transform Britain. The courtyard of the mill complex is free to access and features a range of hands-on demonstrations recreating mill technology, the foundations of some demolished buildings and an 18th Century weir although the original watercourse was lost long ago. The mill buildings themselves are authentic but were repurposed as a colour works for producing dyes and paints in the 20th Century and so were greatly contaminated with lead chromate by the time the site was abandoned in 1979. They were saved from demolition in large part thanks to a local charity called the Arkwright Society that currently owns the site. The insides of some buildings can be accessed by guided tour whilst others host arts and crafts businesses with a restaurant also on site.
Across the road from the mill complex is the mill manager’s house, which is now a holiday cottage. A short way further along the road, past a very busy crossroads with confusing traffic lights, is the village of Cromford. Constructed for the workers of the mills in the late 18th Century, there are a large number of well-preserved cottages here along with the Greyhound Inn, Methodist Church, and a large pond that provided water for the mills. Further still along the road, the Masson Mills complex dates to 1783 although many of the buildings on site were later 19th and 20th Century addition. Today it is occupied by the Working Textile Museum, which was sadly still in a pandemic-induced closure as of September 2021, and a range of modern shops so I did not venture inside. This marks the end of the inscribed area but the Derwent Valley continues northwards to the towns of Matlock Bath and Matlock, the latter originally a spa town. It was not included as one of the Great Spa Towns of Europe but does feature some fine 19th Century buildings. Whilst the modern railway terminates at Marlock, there is a heritage service pulled by steam locomotives that continues onwards to the village of Rowsley in the Peak District National Park. At Matlock Bath there is also a cable car, a rare sight in the UK, which takes visitors up to the Heights of Abraham where there are show caverns, Victorian follies, and views down into the valley. Matlock Bath is also home to the Peak District Mining Museum for those wanting further industrial heritage to explore.
Britain has a plethora of Industrial Revolution sites to choose from and this is arguably one of the most historically significant as the birthplace of the mill system that transformed the economy. Indeed, the architecture of the mills at Cromford was very familiar to me as it is so familiar from later mill buildings all around the midlands and north of England. I have not seen the other inscribed areas around Ambergate, Belper and Derby itself but they appear at a glance to be more of the same and so, despite its importance, this is one of the less interesting UK industrial sites from a visitor’s perspective. For a better feeling of how these kinds of mills operated, Quarry Bank Mill in Styal has a large amount of restored machinery and is worth visiting if only to experience the noise of the things. Styal is also conveniently on the same railway line as Goostrey, the nearest station to Jodrell Bank. That being said, Arkwright got there first and so his mills in the Derwent Valley will forever be enshrined in history as one of the ‘Cradles of the Industrial Revolution’.
March 2018 Roadtrip through England.
We spent the night and half a day in Peak District hiking and counting sheep :)
Just after leaving the park we came to the WHS Derwent Valley. Unfortunately we did nor really know what to expect. Therefore we went past the most interesting town in the north hoping for some amazing architectural icons on the way. The remaining mills looked quite poorely. Some had cheap shops, some hotels. But we did nor really find a spot to stay longer.
After 45 minutes we were already at the end of the WHS. What a pity. Unfortunely one of the rather dissapointg sites on or travels so far.
Well, but England has a lot more to offer also in terms of industrial sites.
I visited this WHS in June 2016. I drove the A6 from Matlock to Derby, stopping whenever there were any sites of interest related to the Derwent Valley Mills WHS. The surrounding area is very green although there are several industrial sites and the mills around Cromford are almost hidden behind trees. Probably the best site to head to is Masson Mills as there are machinery demonstrations in the weaving shed at 11am and 2pm weekdays and at noon and 2pm on Sundays. These demonstrations and the thorough and very interesting explanations given by the Working Textile Museum make all the difference. Having visited quite a number of industrial heritage sites now (and still not being such a fan of industrial heritage sites), those that I enjoyed most were those which could be appreciated as fully working industrial sites and not mere empty buildings or rusty machinery without any visual explanation or some sort of demonstration showing them in action. The noise levels I experienced with just a few machines switched on, together with the thorough explanations on the site's importance, how things worked, what was their use, but also on the poor health and safety conditions. It was a very short demonstration (thankfully) but it really gives you an understanding of what this WHS is about. Unfortunately the museum is understaffed and lacks funding but the employees there are really doing an excellent job and keep this WHS alive. On the negative side, once again the top floors of Masson Mills have been converted to a cheap department store and although there are WH signs outside of the building, inside you have to make an effort to spot the tiny sign leading to the museum among the huge flashy advertisements and discounted shop prices. I would have absolutely no objection for businesses to use the empty parts of such buildings as this generates jobs, keeps the place alive and provides a number of services. However, the management has to strike a balance between giving the WHS full prominence in signage, building plan, etc. and providing space for businesses and shops.
The Derbyshire Wayfarer ticket is a usful way of visiting this WHS. It covers all the buses and trains between Derby and Matlock.
Besides the mills themselves I was interested to see the Cromford wharf, where goods were loaded onto barges and distributed around the country by canal.
I spent an nice afternoon following the A6 from Cromford to Derby, which gave me a chance to view most of the sites inscribed on the list.
Masson Mills (pictured) on the edge of Cromford, has a textile museum where you can see some fabric making machines in action, the staff here were dressed like mill workers and they were really dedicated to the up-keep of these machines and they took great pride in explaining small details to us. The museum was nice but I was not massively interested in the process and I whipped around pretty quickly, the main body of the mill is now a shopping centre.
A little further on was Cromford Mill the worlds first water powered cotton mill, and I was very disappointed here, this was the site I was looking forward to but the main courtyard was very untidy and the museum was exceedingly outdated, again the people running it seemed very dedicated, but just needed some real investment to get the best out of the site, Next to it is a nice stretch of the Cromford canal.
The mill at Belper was one of the first Iron Framed buildings in the world, an inspiration for many architectural advancements that came later, noticeably the early skyscrapers, it looked a little like the work of the Chicago School. Both Cromford and Belper were planned towns for the workers of the mills but I only managed a quick look as I drove through.
I finished off in Derby, a very normal English city that had the world's first factory and the Silk Mill is now an industrial heritage Museum, unfortunately it was closed by the time I got there.
The natural surrounding of the Derwent valley was very nice, and the transport links were excellent, there is a railway station with in walking distance of each of the major sites. On the whole I enjoyed my day at the sites, and it is defiantly worth its place on the list, but some sites could do with some investment of money as there are people dedicated to their up-keep. This site goes into the lower catagory of sites that i have visited and it is not a must see unless you have a real interest in Mills or engineering.
Derwent valley is the cradle of factory system which made not only a productive order,but found the worker's quarter based on the humanitarianism.
I've been to some mills,North mill of Belper was most impressive for me.Almost all mills are now used as museum,restaurant and youth hostel and located on the magnificient gorge.And formerly Sir Richard Arkwrit's castle,which is located on the hill near his mills,is now a inexpensive hotel.
Whilst I have visited both Cromford and the later Masson Mill, it was Cromford which has inspired me to write a show about it, so a previous correspondent may yet be pleased.
But it is the preservation of Cromford Mill and the work done by the Arkwright society which is of the great importance. We think of it in England as the beginning of the Industrial Revolution, without quite knowing why. The first factory was the Silk Mill at Derby, but Cromford pressaged the complete mechanisation of common product. It inspired me to go into the history of it all and all the subsequent social and political turmoil. Not to mention the characters of the men who set it all in motion.
They were not the later mill owners. Yet what started at Cromford had repercussions all over the world.
The A6 from Derby to Matlock is the place to go when you want to see the Derwent Valley and its mills. It's a small road that crosses green valleys and passes tiny towns.
I started my tour in Belper, a somewhat larger town with a prominent mill (unfortunately closed today). The first mill I could get into was Cromford Mill. There are now shops and a small exhibition room, there's not much to see otherwise.
Finally, I went to Masson Mills. This is also turned into a shopping center, where you can buy fancy things like golf clubs and towels&soap. But there is more: a large part of the building is now a working textile museum. Here you can see the spinning and experience the noise in the large factory hall.
I was in Birmingham for a day and my flight was from Manchester. As I had the whole morning free i decided instead to take the highway directly to drive throught the Valley via A6 road. First we drove to Derby, which is a very pleasant town and the ladies in Turist centre are very nice too :)
The valley itself starts immediately after the outskirts of town so if you drive to Matlock you should see all the mills. One mill is even in Derby. First on the road is in Darley Abbey - unfortunately we missed that as there was no sign for that in advance. In Belper the sign is good - you can park next of the mill. Opening hours are only from 1pm so i had no possibility to go in. Mill is placed in a romantic country surrounded by the river and gardens. I can imagine i could spend there some nice evening with my girlfriend :) We missed Cromford mill which is some miles north as it is not on the main road but near of it is the Masson Mill. I was quite surprised when i saw there is a shopping mall and a parking house inside. At least there is a museum. As we were in a hurry i was not able to enjoy the whole place, but i'd like to go back as the country is beautiful around the river and the history is around you - as the area looks like you havent moved away from 19th century. There are some guides for walks and i believe it is worth to take a nice walk.
I very much enjoyed my 3 visits to the shopping complex. The 3nd time my friend and I went round the museum this was interesting to see how the past generations had worked. We traveled my train to Matlcok Bath and by bus to get to the complex. Luckily the bus stops are very close for when the weather is awfull. It is very good to see the building in use again. Keep up the good work.
Coming from Derbyshire, Cromford and the mills have always been of special interest to me. There is so much history about the development of the textile industry and how it effected peoples lives on a huge scale yet there is hardly any information at the site, or around the village - which is just as steeped in interesting, relevent history. For its importance there needs to be some serious investment in this area to make people just as fascinated in it as I am. Something to get peoples' spine's tingling with all the stories, experiences and facts of a time that was so important, not just some 70's documentary and a freezing cold out dated exhibition. I am sure that anyone who is visiting the area as a tourist will be hugely dissapointed. Which is very sad!
This beautiful area which is easily accessed from Derby via the A6 is a very interesting journey through the history of Derbyshire's Mills.
Each of its sites is set amongst picturesque Derbyshire countryside with many other attractions such as stately homes,museums and industries to visit nearby.
Using the transpeak bus service my family and I enjoyed a wonderful day there.
- Jeanne OGrady DAB Josh Daws Seadie :
- Craig Harder Squiffy Ralf Regele Nikolay Marinov Matthewgibbs :
- Philipp Peterer Els Slots Hanming Nan MH Gerlach Zach Forest80 Thomas Harold Watson :
- James Bowyer Randi Thomsen Svein Elias Shandos Cleaver WILLIAM RICH Allan Berry & Lucia Cerón Escobar Zoë Sheng :
- Clyde Martina Rúčková Nomad99 Daniel C-Hazard Hubert Frederik Dawson Fozzak Tevity :
- Stanislaw Warwas Solivagant Szucs Tamas Ivan Rucek Mikko :
- Wojciech Fedoruk Argo Jakob Frenzel Ian Cade :
- Mike :
- Full Name
- Derwent Valley Mills
- Unesco ID
- United Kingdom
- Structure - Factories and industry
- By ID
In the News
The site has 1 locations
The site has 23 connections
WHS on Other Lists
World Heritage Process
164 Community Members have visited.